Sunday, July 6, 2014

Warhammer 40k Dreadnought Conversion - Part 2

OK the first Warhammer Dreadnought conversion went well so onto Part 2! As mentioned previously, the two dreadnoughts were picked up from eBay and cost less than one new one. So cutting them up wasn't a problem. In our scenario of the lost legion, these guys are stranded and have to repair and replace things with whatever they can. This guy had a duel Lascannon for it's right arm and we cut it up to look like it took a direct hit or exploded from overuse.

We had a random spare gun in our parts bin and a piece of plastic tubing to beef up the barrel. The existing barrel was trimmed and shaved to receive the new one. For theme sake we figured it was a local area turret mounted cannon that was scavenged and made to fit the Dreadnought.

It was attached to the outside of the arm in a manner to look integrated on the fly. A spare computer part was added as a gravity feed ammo clip.

Extra armor plating was added and was intentionally rough cut to go with our theme. Some traditional stowage and more futuristic looking parts were placed on the top between the shoulders.

This was the circuit board from a network switch and we felt the indicator lights looked like missile pods. Four of the pairs were cut off the board and glued together. A second part will be added as the "mounting" bracket


Additional components were added as communication equipment, a rear mounted cooling system was attached...

and the assembly was mounted on the left arm.

Here you can see the "cooling system" and the lower part is a mounting-reloading arm attachment we created from additional spare computer parts.

Extra armor plates were attached to the left torso and right lower leg and we primed him with the same Italian Olive as the first Dreadnought.

Now he's ready for painting too!

Here's a great view of the rear mounting of the missile pod.

And there you have it, next we'll get to some troops and possibly a transport or two.

Have a Great Battle,
The Old Crow

Wednesday, July 2, 2014

Warhammer 40k Dreadnought Conversion

After a really rough June which included a high school graduate, a college graduate and a wedding I finally have a minute to breath! Sorry for the lack of posts but hopefully you understand to some degree, Now on to modelling.

Warhammer 40k Dreadnought Conversion
Had picked up a few Warhammer Dreadnoughts on eBay with plans on doing some conversions and finally got the project underway. To start all the upper markings and skulls were shaved off and the arms removed. Battle damage was added over the entire model. The goal was to make this guy look like he's been out on his own for a while. So repairs had to be made with whatever was scavenged from the battlefield and parts would need to be taken along in case something was damaged.

Warhammer 40k Dreadnought Conversion
The Power Fist had the same battle scarring treatment and removed markings

Warhammer 40k Dreadnought Conversion
For the other arm we went for the Assault Cannon with modifications. Originally we were going to add a larger barrel but decided on another route.

Warhammer 40k Dreadnought Conversion
Going through the recycled parts bins I found a few items to use on this conversion. The silver gun looking part on the left is what was used to modify the autocanon.

Warhammer 40k Dreadnought Conversion
Also picked up a "Stowage" pack from Warlord Games to be used on a few different projects.

Warhammer 40k Dreadnought Conversion
OK the first addition were extra armored plates that resembled Tau parts that may have been taken from a deceased battlesuit.

Warhammer 40k Dreadnought Conversion
Planning on stowage, we extended the exhaust pipes. We removed the markings from the rear too.

Warhammer 40k Dreadnought Conversion
Here he is with the first parts added. A piece was attached to the hip joint to appear as a repair from non-conventional parts.

Warhammer 40k Dreadnought Conversion
Next came the stowage. After playing around with a couple variations we settled on this configuration.

Warhammer 40k Dreadnought Conversion
We wanted futuristic stowage too. Here is the first non-traditional stowage container. To hold it on it would need tied down somehow. We applied some superglue gel and placed two pieces of string onto the top of the dreadnought. Then we stuck the part on top of it.

Warhammer 40k Dreadnought Conversion
Once it dried, we pulled the two pieces over and tucked them under the shoulder. We secured them with additional gel

Warhammer 40k Dreadnought Conversion
Next we found some gear like parts and ran thread through them. We glued the parts together before attaching them.

Warhammer 40k Dreadnought Conversion
Before gluing the gears on we added two additional pieces of thread. These will go over the last two pieces of futuristic stowage containers.
As before, once it dried we pulled the thread over and tucked it under the shoulder armor.

Warhammer 40k Dreadnought Conversion
A quick coat of Italian Olive primer and this guy is ready for painting. But before that, off to Dreadnought number two. Stay tuned for more!

Warhammer 40k Dreadnought Conversion
Here's a few parting shots of the finished Dreadnought conversion!

Warhammer 40k Dreadnought Conversion
Have a Great Battle,
The Old Crow

Warhammer 40k Dreadnought Conversion